Projects · 03

Stainless ferrule batch

Gasket surface locked with the card.

Identical stainless energy ferrules on a tray

Project

Seal face locked on the job card.

316 ferrule batch for an energy connection in Izmir. Thread, seal seat, and diameter had to close on the same turning reference. Unspecified surface finish returned as leakage in the field.

Requirement

Without a surface note, the field reported leakage.

As batch size grew, thread and seal seat drifted. Without finish on the packet, second batch did not match first. Energy line reads seal integrity, not tray identity.

Kapsam

316 ferrule, documented surface, repeat order.

Scope was not a single prototype but a repeat batch with seal face locked.

Stainless ferrule
316 body. Thread, seal seat, and diameter on the same card.
Surface note
Seal seat written on the packet as a delivery requirement.
Tool change
In-process check at every insert change.
Repeat order
Vise and program unchanged on second batch.

Yaklaşım

Seal face became a delivery requirement.

After prototype approval, vise and program locked. Finish held on the card. As batch grew, measurement tied to tool change.

Uygulama

Second batch matched the first job card.

Ferrules shipped to energy connection on tray. Label and measurement record closed in the same language. Field saw seated seal face, not leakage.

01
Note
Seal face written on the packet. Default finish removed.
02
Lock
After approved prototype, vise and program version fixed.
03
In-process check
Thread and seat checked at every tool change.

Görseller

İşin durduğu yer.

Turning, seal face, and locked tray—three states of the ferrule.

01 / 03

Lathe cut

Kaydırarak diğer bakışları görün.

Lathe cut
Seal seat
In-process check

Outcome

Seal face held on documentation.

Stainless ferrule flow deployed. Second batch copied first card. Surface note not left to the field.

New production flow
From prototype approval to locked series tray.
Deployed solution
Documented finish note and in-process check routine.
Integrated system
Thread, seal seat, and diameter on the same turning reference.
Process scope
316 ferrule batch, labeling, and measurement record.

Kullanılan çözümler

Ferrule closed as turning reference and locked serial repeat on the same job.

Let’s discuss your stainless connection.

If seal face goes on the packet, we lock thread and seat on the same job card.

Request a Quote

Yükleniyor

Seal face became a delivery requirement.

After prototype approval, vise and program locked. Finish held on the card. As batch grew, measurement tied to tool change.

Uygulama

Second batch matched the first job card.

Ferrules shipped to energy connection on tray. Label and measurement record closed in the same language. Field saw seated seal face, not leakage.